Bonding and Grounding Connectors

  • Designed for easy installation, high conductivity and long life.
  • Install with wrench (hex head) or pliers (square).
  • Veteran owned company. 

Catalog
Number
Galv
Steel
Strand
Copper
Tap
Pcs.
per Ctn.
Wt.
per 100
NAED
UPC
No.632591-
Finish
Description
K1**1/4"-7/16"#8 sol. - 2/01001670746-6Fully Plated/Tap-Grooved
K21/4"-7/16"#8 sol. - 2/01001670747-3Fully Plated
K31/4"-7/16"#8 sol. - 2/01001670748-0Not Plated
KUL*1/4"-7/16"#8 sol. - 2/01001670749-7Fully Plated

*Denotes UL Listed, ** RUS Listed

Figure 8 Or IM Cable Insulation Piercing Connector

  • Cast Bronze.
  • Tin Plated.
  • Teeth pierce messenger insulation.

Catalog
Number
Conductor
Range
Pcs.
per Ctn.
Wt.
per 100
NAED
UPC
No.632591-
CC167P.146-.312 cable to
.146-.312 tap
502370753-4

Notes:
Teeth puncture insulation during tightening for a positive ground without skinning conductor.

Kenny Clamp

Galvan Kenny Clamps are your best choice to ensure that grounding electrode conductor installations are code compliant. The Kenny Clamp is UL-Listed for the bonding and grounding of electrode connectors in panel boards, pad mounts, dry-type transformers, metallic raceways and enclosures. Simply install Galvan’s Kenny Clamp through a 1/2-inch knockout with paint removed, tighten the steel locknut, insert the grounding electrode through the clamp and tighten the compression nut. Your installation is now NEC Code compliant. The Kenny Clamp saves time and money compared to current non-compliant alternatives.

CatalogNumberConductorRangePcs. per Ctn.Wt.
per 100
NAED
UPC
No. 632591-
KCCA-8 sol#8 solid1031613927
KCCA-8 str#8 stranded1031613934
KCCA-6 sol#6 solid1031613941
KCCA-6 str#6 stranded1031613958
KCCA-4 sol#4 solid1031613965
KCCA-4 str#4 stranded1031613972
KCCA-2 str#2 stranded1031613989
KCCA-1/01/01031613996
KCCA-2/02/01031614009
KCCA-3/03/01031614016

Kenny Clamp

  • Eliminates potential for a choke at the hole
  • Meets UL 467 for bonding/grounding
  • Meets UL 486A for connectors
  • Complies with NEC 110.3(B) and 250.8 (using listed grounding or bonding connector for proper application)
  • Complies with NEC 250.64(E) (entering and exiting metallic raceways and enclosures)
Contact Us

Send us an email and we'll get back to you ASAP!

Not readable? Change text. captcha txt