Page 7 - Demo

Notes: S Suffix-Denotes sectional ground rod. UNC threads. * These rods are UL Listed. ** These rods meet UL and have mils minimum of copper. RUS now accepts 10 mils of copper. Refer to page 5 for NEC, NESC and RUS code requirements. † 1010S is non-compliant with BABAA/BEAD.For exothermic welds, visit www.thermoweld.comDiameter Actual Matching Sub & Wt. NAED Catalog Diameter X Length Diameter Coupling & Master Per 100 UPC No. Color Number X Length (metric) Approx. Inches Drive Stud Bundle lb (kg) 632591- Code 5008LS* 1/2\ 12.7 mm x 2.4 m 0.500-0.510 50-LC/50-LDS 5 / 100 550 (250) 63138-9 Orange 5010LS* 1/2\ 12.7 mm x 3 m 0.500-0.510 50-LC/50-LDS 5 / 100 690 (313) 63130-3 Orange 6258S* 5/8\ 14.2 mm x 2.4 m 0.555-0.565 60-C/60-DS 5 / 100 680 (308) 63588-2 Copper 6258G13S** 5/8\ 14.2 mm x 2.4 m 0.555-0.565 60-C/60-DS 5 / 100 680 (308) 61121-3 Copper 6260S* 5/8\ 14.2 mm x 3 m 0.555-0.565 60-C/60-DS 5 / 100 850 (386) 63580-6 Copper 6260G13S** 5/8\ 14.2 mm x 3 m 0.555-0.565 60-C/60-DS 5 / 100 850 (386) 61491-7 Copper 7506S 3/4\ 17.3 mm x 1.8 m 0.673-0.683 70-C/70-DS 5 / 50 756 (343) 61525-9 N/A 7506G13S 3/4\ 17.3 mm x 1.8 m 0.673-0.683 70-C/70-DS 5 / 50 770 (350) 61524-2 N/A 7508S* 3/4\ 17.3 mm x 2.4 m 0.673-0.683 70-C/70-DS 5 / 50 1010 (459) 63348-2 Black 7510S* 3/4\ 17.3 mm x 3 m 0.673-0.683 70-C/70-DS 5 / 50 1255 (569) 63340-6 Black 1010S*† 1\ 25.4 mm x 3 m 0.907-0.917 80-C/80-DS 25 2223 (1010) 63440-3 N/ACOPPER-BONDED AND GALVANIZED GROUND RODSGALVAN INDUSTRIES, INC. Electrical Products Division, (704) 455-5102, www.galvanelectrical.com 7• Threaded on both ends. • Listed to UL-467 specification. • RUS now accepts 10 mils of copper. Please see page 5. • Meets NEMA GR-1 • Rods less than eight feet or less than 10 mils of copper, DO NOT meet UL requirements, nor the National Electrical Code (NEC). • Made in USA. Veteran owned company. Copper-Bonded Sectional Ground RodsHot Dip Galvanized Ground RodsDiameter Actual Sub & Wt. NAED Catalog Diameter X Length Diameter Rod Matching Master Per 100 UPC No. Color Number X Length (metric) Approx. Inches Listing Coupling Bundle lb (kg) 632591- Code GR5005* 1/2\ 12.4 mm x 1.5 m 0.484-0.500 N/A – 10 / 100 320 (146) 70731-2 Green GR5006 1/2\ 12.8 mm x 1.8 m 0.484-0.500 N/A – 10 / 100 385 (175) 70732-9 Green GR5008 1/2\ 12.8 mm x 2.4 m 0.484-0.500 N/A – 10 / 100 511 (232) 70733-6 Green GR6254F 5/8\ 15.9 mm x 1.2 m 0.625-0.640 N/A GRC-625G 10 / 100 420 (191) 61526-6 – GR6256 5/8\ 14 mm x 1.8 m 0.543-0.555 N/A GRC-54G 5 / 100 475 (216) 70701-5 – GR6256F 5/8\ 15.9 mm x 1.8 m 0.625-0.640 N/A GRC-625G 5 / 100 630 (286) 61469-6 Yellow GR6258 5/8\ 14.2 mm x 2.4 m 0.543-0.555 UL GRC-54G 5 / 100 635 (288) 70702-2 Copper GR6258F* 5/8\ 15.9 mm x 2.4 m 0.625-0.640 UL GRC-625G 5 / 100 837 (380) 61407-8 Yellow GR6250 5/8\ 14 mm x 3 m 0.543-0.555 UL GRC-54G 5 / 100 790 (359) 70703-9 Copper GR6250F* 5/8\ 15.9 mm x 3 m 0.625-0.640 UL GRC-625G 5 / 100 1046 (475) 61468-9 Yellow GR7508F* 3/4\ 19.1 mm x 2.4 m 0.750-0.765 UL GRC-34G 5 / 50 1205 (547) 61478-8 Black GR7510F 3/4\ 19.1 mm x 3 m 0.750-0.765 UL GRC-34G 5 / 50 1505 (683) 61479-5 Black GR1010F 1\ 25.4 mm x 3 m 1.000-1.140 UL GRC-100G 5 / 25 2700 (1225) 61484-9 –• Outstanding corrosion resistance; high-strength immersed in pure molten zinc forming a rust-proof barrier metallurgically bonded to substrate of steel. • Minimum zinc thickness per ASTM A-123. • Meets NEMA GR-1. • Stamped for inspectability and traceability. • Galvan color-codes the end of the rods to designate diameters to reduce errors. • Listed to UL 467 specifications. • Made in USA. Veteran owned company. Notes: Rods less than 8' (96 inches) do not meet the requirements of UL, NESC nor NEC Codes. Most competitors’ galvanized grounds rods are NOT listed.WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.govBABAA and BEAD Compliant