Page 20 - GALV24-0334 Galvan Electrical Catalog 122323_08-1

UTILITY
Type PAC Aluminum With Copper Liner
Catalog Number Standard
Conductor Range
Pcs. Per Ctn.
Wt. Per 100
NAED UPC No. 632591-
Main
Tap
ACSR
Aluminum
Copper
PAC 345
1/0–8
1/0 Sol.–8 Str.
1/0 Sol.–8 Str.
50
23.0
61380-4
PAC 7
336.4–1/0
400–2/0 1/0 – 6 AR
1/0–8 Sol. 1/0 – 6 AR
25
23.0
61379-8
• Corrosion resistant design and construction.
• No assembly required.
• Cast aluminum body surrounds copper liner, sealing out moisture.
• MadeinUSA.
Note: Add suffix “9” for prefilled with inhibitor
Type DGC Drive-on Ground Clamp
Note: Galvan is a veteran owned company.
Catalog
Number
Ground Rod Size
Pieces/
Cartons
Wt. per 100
Ground Wire Size
NAED UPC No. 632591
DGC-5844
5/8 (0.555 - 0.565)
25
20.0
1 or 2 - #4 Sol.
61329-3
DGC-5866
5/8 (0.555 - 0.565)
25
20.0
1 or 2 - #6 Sol.
61330-9
DGC-5846
5/8 (0.555 - 0.565)
25
20.0
1 or 2 - #4 or #6 Sol.
61522-8
• For use on all 5/8" diameter UL Listed copper-bonded ground rods.
• Used to bond one or two, #4 or #6, solid copper conductors respectively.
• Produced from high-strength copper alloy, the same material as UL Listed “acorn” type ground rod clamps.
• May be used effectively for direct-burial applications.
• Toinstall,theonlyrequiredtoolisahammer.Compressionforcesmaximizethe“direct” surface-to-surface copper contact between conductor and ground rod electrode.
• Adrive-headshouldbeusedduringinstallationofthegroundrodelectrodeintothesoil, thus minimizing any possible mushrooming or deformation on the drive (or chamfer) end of the rod. This will improve ease of installation of the drive-on clamp.
• This design places the grounding conductor in “direct” contact with the ground rod, thereby eliminating multiple paths for the current to follow, which could contribute to increased resistance.
• MadeinUSA.
To Install:
• Select the proper connector from the above chart.
• Drivethegroundrodelectrodetotheproperdepthpernationalorlocalcoderecommendations.
• Position connector and ground rod conductors as shown in middle illustration.
• Drive connector onto rod until top of connector is flush with top of ground rod as shown in adjacent illustration. Galvan suggests using a 20-ounce hammer.
20 GALVAN INDUSTRIES, INC. Electrical Products Division, (704) 455-5102, www.galvanelectrical.com